The importance of oil microfiltration for its operation

Machines and equipment are subject to contamination at different points in their useful life, either in the process of assembly, storage, or during normal operation. Often, the contamination and its losses generated may not show signs of the problem, which is worrying. Once unnoticed, contamination can progress gradually and cause major failures and serious damage.

Therefore, it is essential to invest in techniques and procedures that can accurately assess the condition of each equipment and its components, avoiding early wear and general system failures. In this sense, the importance of microfiltration of oil as one of the main methods for the maximum use of the useful life of the equipment and the cost savings.

Such procedure basically consists of the passage of the lubricating oil through a set of filters that perform the elimination of the contaminating particles, allowing an adequate lubrication, in order to prevent damage to the equipment. Unlike traditional filtration processes, microfiltration is important due to its ability to identify very small solid contaminations.

Advantages and importance of microfiltration

Microfiltration performs a more efficient capture, being able to retain particles of up to two microns of size. This technique can also be used in new oils, since they happen to come with contaminating particles straight from the factory. In addition, microfiltration also has ecological value, since it allows the reuse of hydraulic oil.

By maintaining a clean fluid within the systems, microfiltration reduces the risk of contamination, with less tendency to wear. Thus, the longevity of the equipment and all its components is favored. Thus, the number of necessary stoppages and the time spent on interventions are also reduced. All of this generates better results of availability, productivity and maintenance costs.

What happens if I don’t use microfiltration?

Without the adoption of this procedure, your line of operation is subject to contamination and other serious problems for the productivity of your business. The absence of these control and monitoring measures causes component wear, clogging of holes and formation of rust and other sediments.

Other aggravating issues caused by contamination are loss of efficiency and productivity, unnecessary downtime, excessive fluid changes and premature failures in valves, pumps and injectors.

All of these consequences require more frequent and costly interventions, representing drastic losses for the economy of your business. To learn more about the importance of microfiltration and the main reasons for adopting it in your equipment, read our post about the subject.

Conclusion

Predictive maintenance of your equipment should be a constant concern in your operating environment. Its techniques and procedures are fundamental for the maximum use of the useful life of its equipment and for cost savings. In this way, the importance of microfiltration is evident as the main tool to guarantee the good condition of the lubricating oil, as well as the best results of availability and productivity.

Now you know better the importance of microfiltration, but don’t stop there: learn more about the main differences betweenfiltration and microfiltration in our post. Now also make a price with our experts and check out everything we can do for the success of your business!

Scroll to Top
× Como podemos ajudar? Available from 08:00 to 18:00 Available on SundayMondayTuesdayWednesdayThursdayFridaySaturday